EBV Smart Balancing Control Valves DN65

---

EBV65-024-000  (24Vac/dc)    1280,00 €

EBV65-230-000 (230Vac)         1360,00 €

EBV65-024-100  (24Vac/dc with failsafe function)    1370,00 €

EBV65-230-100 (230Vac with failsafe function)         1440,00 €

Prices are subject to VAT 24% 

Smart Balancing  pressure independent control Valve, PN16, DN65, flanged connections,  cast iron body and brass plug.
Flow rate max 37 m3/h
Equipped with p/t plugs and pressure sensors
Motorized with actuator 24 Vac/dc (EBV65-024-x00)

Motorized with actuator 230 Vac (EBV65-230-x00)
Control signal 0-10 Vdc (default), 2-10 Vdc, 0-5/2-6 Vdc, 5-10/6-10 Vdc e 4-20 mA
Modbus-RTU connectivity, IP54 .

EBV smart balancing control valve can offer the followings features :

Position Control

The actuator receive the modulating signal coming from a control loop implemented by the BMS and the valve is positioned from 0% to 100% accordingly to the voltage (0...10 Vdc) or current signal (4...20 mA).

Pressure Independent Control Function

The control signal coming from the BMS (i.e. 0...10 Vdc) has to be considered as the flow rate set point the BMS wants to deliver to the specific coil (Input 0V Flow 0; Input 10V: Flow: Qmax). The positioning algorithm set the valve position considering the valve characteristics and the current differential pressure across the valve. This function allows to control the flow delivered to the coil regardless the pressure fluctuations in the system.

It is possible to set the desired maximum flow rate whose value is included between the values of Qmax and Qmin defined for valve. To do this, the configuration tool is available which can be used both with the Modbus connection and via USB.  By default the value of the maximum desired flow rate is set to the maximum flow rate value. The maximum desired flow rate value corresponds to the maximum command signal (generally 10 V or 100%). For pressure differences below 0.01 bar, the flow rate calculated is 0 l/h and the valve position does not depend on the positioning algorithm, but directly on the control signal set by the BMS.

Valve body   Cast Iron

Plug    Brass

PN16

Fluid min   -10°C

Fluid max    120°C

Leakage   0,03% Kvs

Valve type    Smart valve

DN  65mm

Connection    Flanged

Fluid   Water

Flow max [m3/h]   37,00

Flow min [m3/h]   12,00

Max Differential Press. [kPa]   800

Min Differential Press. [kPa]   35

Allowable operating pressure   16bar

Connection size   UNI EN 1092-1

Pressure plugs    Yes

Application      HVAC-R

Emergency Return    EBV65-024-100  :  Yes       EBV65-230-100 :  Yes

Communication protocol     Modbus RTU/ASCII

Temperature sensors     No 

EBV80-024-000  (24Vac/dc)    1414,00 €

EBV80-230-000 (230Vac)         1486,00 €

EBV80-024-100  (24Vac/dc with failsafe function)    1500,00 €

EBV80-230-100 (230Vac with failsafe function)         1570,00 €

Prices are subject to VAT 24% 

Smart Balancing  pressure independent control Valve, PN16, DN80, flanged connections,  cast iron body and brass plug.
Flow rate max 59 m3/h
Equipped with p/t plugs and pressure sensors
Motorized with actuator 24 Vac/dc (EBV80-024-x00)

Motorized with actuator 230 Vac (EBV80-230-x00)
Control signal 0-10 Vdc (default), 2-10 Vdc, 0-5/2-6 Vdc, 5-10/6-10 Vdc e 4-20 mA
Modbus-RTU connectivity, IP54 .

EBV smart balancing control valve can offer the followings features :

Position Control

The actuator receive the modulating signal coming from a control loop implemented by the BMS and the valve is positioned from 0% to 100% accordingly to the voltage (0...10 Vdc) or current signal (4...20 mA).

Pressure Independent Control Function

The control signal coming from the BMS (i.e. 0...10 Vdc) has to be considered as the flow rate set point the BMS wants to deliver to the specific coil (Input 0V Flow 0; Input 10V: Flow: Qmax). The positioning algorithm set the valve position considering the valve characteristics and the current differential pressure across the valve. This function allows to control the flow delivered to the coil regardless the pressure fluctuations in the system.

It is possible to set the desired maximum flow rate whose value is included between the values of Qmax and Qmin defined for valve. To do this, the configuration tool is available which can be used both with the Modbus connection and via USB.  By default the value of the maximum desired flow rate is set to the maximum flow rate value. The maximum desired flow rate value corresponds to the maximum command signal (generally 10 V or 100%). For pressure differences below 0.01 bar, the flow rate calculated is 0 l/h and the valve position does not depend on the positioning algorithm, but directly on the control signal set by the BMS.

Valve body   Cast Iron

Plug    Brass

PN16

Fluid min   -10°C

Fluid max    120°C

Leakage   0,03% Kvs

Valve type    Smart valve

DN  80mm

Connection    Flanged

Fluid   Water

Flow max [m3/h]   59,00

Flow min [m3/h]   25,00

Max Differential Press. [kPa]   800

Min Differential Press. [kPa]   35

Allowable operating pressure   16bar

Connection size   UNI EN 1092-1

Pressure plugs    Yes

Application      HVAC-R

Emergency Return    EBV80-024-100  :  Yes       EBV80-230-100 :  Yes

Communication protocol     Modbus RTU/ASCII

Temperature sensors     No 

EBV100-024-000  (24Vac/dc)    1680,00 €

EBV100-230-000 (230Vac)         1760,00 €

EBV100-024-100  (24Vac/dc with failsafe function)    1770,00 €

EBV100-230-100 (230Vac with failsafe function)         1840,00 €

Prices are subject to VAT 24% 

Smart Balancing  pressure independent control Valve, PN16, DN100, flanged connections,  cast iron body and brass plug.
Flow rate max 77 m3/h
Equipped with p/t plugs and pressure sensors
Motorized with actuator 24 Vac/dc (EBV100-024-x00)

Motorized with actuator 230 Vac (EBV100-230-x00)
Control signal 0-10 Vdc (default), 2-10 Vdc, 0-5/2-6 Vdc, 5-10/6-10 Vdc e 4-20 mA
Modbus-RTU connectivity, IP54 .

EBV smart balancing control valve can offer the followings features :

Position Control

The actuator receive the modulating signal coming from a control loop implemented by the BMS and the valve is positioned from 0% to 100% accordingly to the voltage (0...10 Vdc) or current signal (4...20 mA).

Pressure Independent Control Function

The control signal coming from the BMS (i.e. 0...10 Vdc) has to be considered as the flow rate set point the BMS wants to deliver to the specific coil (Input 0V Flow 0; Input 10V: Flow: Qmax). The positioning algorithm set the valve position considering the valve characteristics and the current differential pressure across the valve. This function allows to control the flow delivered to the coil regardless the pressure fluctuations in the system.

It is possible to set the desired maximum flow rate whose value is included between the values of Qmax and Qmin defined for valve. To do this, the configuration tool is available which can be used both with the Modbus connection and via USB.  By default the value of the maximum desired flow rate is set to the maximum flow rate value. The maximum desired flow rate value corresponds to the maximum command signal (generally 10 V or 100%). For pressure differences below 0.01 bar, the flow rate calculated is 0 l/h and the valve position does not depend on the positioning algorithm, but directly on the control signal set by the BMS.

Valve body   Cast Iron

Plug    Brass

PN16

Fluid min   -10°C

Fluid max    120°C

Leakage   0,03% Kvs

Valve type    Smart valve

DN  100mm

Connection    Flanged

Fluid   Water

Flow max [m3/h]   77,00

Flow min [m3/h]   45,00

Max Differential Press. [kPa]   800

Min Differential Press. [kPa]   35

Allowable operating pressure   16bar

Connection size   UNI EN 1092-1

Pressure plugs    Yes

Application      HVAC-R

Emergency Return    EBV100-024-100  :  Yes       EBV100-230-100 :  Yes

Communication protocol     Modbus RTU/ASCII

Temperature sensors     No 

EBV125-024-000  (24Vac/dc)    1940,00 €

EBV125-230-000 (230Vac)         2000,00 €

EBV125-024-100  (24Vac/dc with failsafe function)    2020,00 €

EBV125-230-100 (230Vac with failsafe function)         2100,00 €

Prices are subject to VAT 24% 

Smart Balancing  pressure independent control Valve, PN16, DN100, flanged connections,  cast iron body and brass plug.
Flow rate max 118 m3/h
Equipped with p/t plugs and pressure sensors
Motorized with actuator 24 Vac/dc (EBV125-024-x00)

Motorized with actuator 230 Vac (EBV125-230-x00)
Control signal 0-10 Vdc (default), 2-10 Vdc, 0-5/2-6 Vdc, 5-10/6-10 Vdc e 4-20 mA
Modbus-RTU connectivity, IP54 .

EBV smart balancing control valve can offer the followings features :

Position Control

The actuator receive the modulating signal coming from a control loop implemented by the BMS and the valve is positioned from 0% to 100% accordingly to the voltage (0...10 Vdc) or current signal (4...20 mA).

Pressure Independent Control Function

The control signal coming from the BMS (i.e. 0...10 Vdc) has to be considered as the flow rate set point the BMS wants to deliver to the specific coil (Input 0V Flow 0; Input 10V: Flow: Qmax). The positioning algorithm set the valve position considering the valve characteristics and the current differential pressure across the valve. This function allows to control the flow delivered to the coil regardless the pressure fluctuations in the system.

It is possible to set the desired maximum flow rate whose value is included between the values of Qmax and Qmin defined for valve. To do this, the configuration tool is available which can be used both with the Modbus connection and via USB.  By default the value of the maximum desired flow rate is set to the maximum flow rate value. The maximum desired flow rate value corresponds to the maximum command signal (generally 10 V or 100%). For pressure differences below 0.01 bar, the flow rate calculated is 0 l/h and the valve position does not depend on the positioning algorithm, but directly on the control signal set by the BMS.

Valve body   Cast Iron

Plug    Brass

PN16

Fluid min   -10°C

Fluid max    120°C

Leakage   0,03% Kvs

Valve type    Smart valve

DN  125mm

Connection    Flanged

Fluid   Water

Flow max [m3/h]   118,00

Flow min [m3/h]   61,00

Max Differential Press. [kPa]   800

Min Differential Press. [kPa]   35

Allowable operating pressure   16bar

Connection size   UNI EN 1092-1

Pressure plugs    Yes

Application      HVAC-R

Emergency Return    EBV125-024-100  :  Yes       EBV125-230-100 :  Yes

Communication protocol     Modbus RTU/ASCII

Temperature sensors     No 

EBV150-024-000  (24Vac/dc)    2180,00 €

EBV150-230-000 (230Vac)         2260,00 €

EBV150-024-100  (24Vac/dc with failsafe function)    2270,00 €

EBV150-230-100 (230Vac with failsafe function)         2340,,00 €

Prices are subject to VAT 24% 

Smart Balancing  pressure independent control Valve, PN16, DN100, flanged connections,  cast iron body and brass plug.
Flow rate max 177m3/h
Equipped with p/t plugs and pressure sensors
Motorized with actuator 24 Vac/dc (EBV150-024-x00)

Motorized with actuator 230 Vac (EBV150-230-x00)
Control signal 0-10 Vdc (default), 2-10 Vdc, 0-5/2-6 Vdc, 5-10/6-10 Vdc e 4-20 mA
Modbus-RTU connectivity, IP54 .

EBV smart balancing control valve can offer the followings features :

Position Control

The actuator receive the modulating signal coming from a control loop implemented by the BMS and the valve is positioned from 0% to 100% accordingly to the voltage (0...10 Vdc) or current signal (4...20 mA).

Pressure Independent Control Function

The control signal coming from the BMS (i.e. 0...10 Vdc) has to be considered as the flow rate set point the BMS wants to deliver to the specific coil (Input 0V Flow 0; Input 10V: Flow: Qmax). The positioning algorithm set the valve position considering the valve characteristics and the current differential pressure across the valve. This function allows to control the flow delivered to the coil regardless the pressure fluctuations in the system.

It is possible to set the desired maximum flow rate whose value is included between the values of Qmax and Qmin defined for valve. To do this, the configuration tool is available which can be used both with the Modbus connection and via USB.  By default the value of the maximum desired flow rate is set to the maximum flow rate value. The maximum desired flow rate value corresponds to the maximum command signal (generally 10 V or 100%). For pressure differences below 0.01 bar, the flow rate calculated is 0 l/h and the valve position does not depend on the positioning algorithm, but directly on the control signal set by the BMS.

Valve body   Cast Iron

Plug    Brass

PN16

Fluid min   -10°C

Fluid max    120°C

Leakage   0,03% Kvs

Valve type    Smart valve

DN  150mm

Connection    Flanged

Fluid   Water

Flow max [m3/h]   177,00

Flow min [m3/h]   80,00

Max Differential Press. [kPa]   800

Min Differential Press. [kPa]   35

Allowable operating pressure   16bar

Connection size   UNI EN 1092-1

Pressure plugs    Yes

Application      HVAC-R

Emergency Return    EBV150-024-100  :  Yes       EBV150-230-100 :  Yes

Communication protocol     Modbus RTU/ASCII

Temperature sensors     No